MODEL |
XMG16CX USB |
Input Channels |
|
Microphone Input |
Electronically Balanced, Discrete Input Configuration |
Frequency Response |
20Hz to 50kHz, +/-3dB |
Distortion (THD&N) |
<0.01% At + 4dBu, 1kHz |
Gain range |
0dB to 50dB (MIC) |
SNR (Signal to Noise Rate ) |
>100 dB |
Line Input |
Electronically Balanced |
Frequency Response |
20Hz to 50kHz, +/-3dB |
Distortion (THD&N) |
<0.01% At + 4dBu, 1kHz |
Sensitivity Range |
20 dBu to -30dBu |
Impedance |
|
Microphone Input |
1.4k Ohms |
All Other Input |
10k Ohms or Greater |
All Other Outputs |
120 Ohms |
MONO Equalization |
|
High |
±15dB @12kHz |
Mid |
±12dB @100 ~ 8kHz |
Low |
±15dB @80Hz |
STEREO Equalization |
|
High |
±15dB @12kHz |
Mid |
±15dB @3kHz |
Mid |
±15dB @500Hz |
Low |
±15dB @80Hz |
MAIN Equalization |
|
7 BAND EQ |
±12dB @ 63Hz, 160Hz, 400Hz,1kHz, 2.5kHz, 6.3kHz,16kHz |
DSP Section |
|
A/D And D/A Converters |
24 Bit |
DSP Resolution |
24 Bit |
Type of effects |
ECHO﹐ECHO+VERB﹐TREMOLO﹐PLATE﹐CHORUS﹐VOCAL﹐ROTARY﹐SMALL ROOM﹐FLANGE+VERB﹐LARGE HALL |
Presets |
100 |
Controls |
100-Posistion PUSH Selector |
CLIP LED |
MUTE SWITCH (FOOT SWITCH) with LED Indicator |
Main Mix Section |
|
Noise (Bus noise) |
Fader 0 dB, Channels muted: -85dBr (ref.: +4dBu) |
Fader 0 dB, All Input Channels Assigned and Set To UNITY Gain: -80 dBr (ref.: +0dBu) |
Max output |
+20dBu Unbalanced, 1/4″ Jacks |
SUB Sends max out |
+20dBu |
Power Supply |
Switching Power |
Rated Power Consumption |
40W |